Our Partners
Previous
Next
Menu
True North Cycle Hub based in Upper Hulme near Leek in the Peak District offering professional bicycle servicing and repair for all types of bike.
Here at our Cycle Hub we’d like to think our years of maintaining, servicing our own bikes for riding and racing alongside our qualified Cytech qualified technicians can help you with a more individual and specialist repair service.
What makes us different to majority of other bike shops is our relaxed open shop/workshop, so, if you have time call in for a coffee or brew, you can watch us work on your bicycle or chat with us for some advice or to see us for advice on your next new bike or parts and spares.
Not only can we service your bike professionally and quickly, give you first-hand advice but we also offer a variety of specialist options, including custom wheel building, custom frame and bike building, fork and shock servicing, and professional advice on set up and positioning.
At our E-Bike Service Centre, we are fully authorised to diagnose, service and repair most types of e-bike systems including Bosch, Shimano Steps, Yamaha, and TQ. Our certified E-Bike technicians are here to help, whether it’s a software update, full service or custom build. Here at the Hub we not only repair e-bikes, we ride, hire and race them so we understand their complexities and also their issues and can easily diagnose any current and potential problem
Scroll down to see our service options and repair costs
Use our contact form to book in yourself or give us a call…..
In addition to our workshop services we carry out a large number of repairs to all bikes. We have itemised all repairs so you have an understanding of our pricing.
Our repair prices do not include replacement parts except where otherwise stated.
If you do buy your parts from us and also get us to fit them for you we offer a 10% discount off the parts RRP price and a further 10% off the repair price.
| Fault find and provide diagnostic report for motor and battery (Bosch, Yamaha Shimano) including firmware update and error code removal | £72.00 |
| Update Firmware and Software (Bosch, Yamaha & Shimano) | £30.00 |
| Remove and replace motor* | £72.00 |
| Adjust battery location points | £24.00 |
| Battery capacity Test | £30.00 |
| Install integrated lights* | £42.00 |
| Bosch Purion Upgrade | £119.00 |
| Bosch Nyon Upgrade | £375.00 |
| Gear indexing adjustment | £12.00 |
| Replace gear cable inner | £12.00 |
| Gear inner and outer cable | £18.00 |
| Gear shifter fit | £18.00 |
| Re-wrap road bar tape | £15.60 |
| Replace chainset | from £18.00 |
| Replace chain rings | from £15.00 |
| Chain fit | £12.00 |
| Cassette/freewheel fit | £18.00 |
| Mech fit (includes new cable and set up) | £30.00 |
| Gear Hanger alignment and gear set up (where possible) | £30.00 |
| Fit new rear mech hanger and index gears | £21.60 |
| DI2 firmware updates (all components) | £18.00 |
| DI2 diagnostics & troubleshootinginc updates | £24.00 |
| DI2 installation. | POA |
| Fit new disc brake (hydraulic) | £18.00 |
| Fit new disc brake (cable) | £15.00 |
| Replace disc brake pads (front or rear only) | £9.00 |
| Replace disc brake pads (full bike) | £18.00 |
| Clean / recondition disc rotor (per brake) | £10.00 |
| Bleed disc brake – inc fluid | £18.00 |
| Shorten existing disc brake hose – Includes brake bleed/olive/insert | £24.00 |
| Replace disc brake hose – Includes brake bleed | £30.00 |
| Replace disc brake lever – Includes brake bleed | £24.00 |
| Replace disc brake caliper – Includes brake bleed | £24.00 |
| Replace disc rotor | £12.00 |
| Fit new road / cross bike cable disc brake | £30.00 |
| Adjust cable brake (front and rear) | £12.00 |
| Replace brake blocks and adjust brakes (front or rear only) | £12.00 |
| Replace brake blocks and adjust brakes (front and rear) | £18.00 |
| Replace brake cable inner (front or rear only) | £6.00 |
| Replace brake cable inners (full bike) | £12.00 |
| Replace brake cable inner and outer (front or rear only) | £6.00 |
| Replace brake cable inners and outers (full bike) | £12.00 |
| Fit new MTB / Hybrid cable brake (V Brake or canti) | £14.40 |
| Fit new MTB / Hybrid cable brake (disc) | £18.00 |
| Fit new road bike caliper or cross bike canti brake | £18.00 |
| Fit new road / cross bike brake lever and rewrap bar tape | £30.00 |
| Fit front tyre and/or tube replacement | £6.00 |
| Fit rear tyre and/or tube replacement | £10.00 |
| Tubeless tyre conversion – including tape, valve and sealant (dependant on rim & tyre) per wheel. | £30.00 |
| Puncture repair including tyre removal and refitting | £12.00 |
| Front wheel build * | £54.00 |
| Rear wheel build * | £54.00 |
| True wheel (front or rear) | £18.00 |
| Replace spoke during trueing – per spoke | £2.40 |
| Rim replacement on existing wheel * | £48.00 |
| Hub replacement on existing wheel * | £40.00 |
| Tyre removal and refitting for wheel true * | £12.00 |
| Cassette removal and refitting for wheel true * | £6.00 |
| Install tyre protection inserts | £24.00 |
| Ball bearing clean and new grease (front) * | £24.00 |
| Ball bearing clean and new grease (rear) * | £16.00 |
| Hub cartridge bearing replacement * | from £18.00 |
| Adjust hub bearing cones (front or rear) | £6.00 |
| Freehub body replacement | £15.00 |
| Freehub body service (includes rear bearing clean) * | £24.00 |
| Adjust headset | £6.00 |
| Fit new headset (onto bare frame) | £24.00 |
| Remove old headset, fit new, and re-install forks * | £36.00 |
| Replace headset bearings (loose or caged bearings) * | £18.00 |
| Replace headset bearings (cartridge type) * | £24.00 |
| Fit ‘star fangled’ headset nut | £6.00 |
| Fit replacement flat handlebars and reinstall brake levers and shifters. | £12.00 |
| Fit replacement road / drop handlebars and reinstall tape and brake and shift levers. | £30.00 |
| Fit replacement or reinstall handlebar grips | £6.00 |
| Fit replacement or reinstall handlebar tape | £15.00 |
| Fit replacement stem | £6.00 |
| New frame (parts swapped over from existing bike) * Price depending on bike type, but we work on workshop hourly rate due to complexities of different bikes or parts being swapped over and often new parts required) Any extra parts fitted as part of swap over but cost of parts not included | from £43.75/hour |
| Custom bike build (New parts built up to your spec) * | from £144.00 |
| New bike – ‘Out of the box’ bike assembly * | £48.00 |
| New bike – Set up and safety check * | £24.00 |
| Bike disassembly and packing for courier or travel * | £24.00 |
| Fit new forks * | £30.00 |
| Suspension fork removal and refit for servicing * | £12.00 |
| Frame pivot bearing replacement * | from £40.00 |
| Clean/re-tap bottom bracket threads * | £24.00 |
| Face bottom bracket shell * | £19.00 |
| Re-tap existing threads (bottle bosses etc.)* | £12.00 |
| Straighten rear mech hanger (where possible) * | £12.00 |
| Check and adjust dropout alignment (where possible) * | £19.00 |
| Pedal fitting and/or removal | from £6.00 |
| Pedal cleat fitting | £12.00 |
| Pedal cleat removal (seized bolts) | from £24.00 |
| Pedal servicing & bearing replacements | from £24.00 |
| Fit pannier rack | £12.00 |
| Fit pannier bags | from £6.00 |
| Fit lights (front and/or rear) | £6.00 |
| Fit and set up cycle computer | from £12.00 |
| Fit replacement saddle/seatpost | £10.00 |
We believe its best to stick to what you are good at, so we like to leave suspension to Rick at Slick and Slide as he is one of the best. He looks after all our own race bike suspension servicing and he has invested in every single specialist tool you need to do the job properly. As suspension servicing is evolving and ever increasingly complicated, Slick and Slide are an authorised Cane Creek and Fox service centre independently owned that provides servicing for mountain bike forks and rear shocks from manufacturers such as Rock Shox and Fox Racing.
* We only offer suspension service with one of own service plans S-2 and above.
PLEASE NOTE
Due to poor spares availability it is becoming increasingly difficult to service older Marzocchi products, If you have a pre 2017 shock/fork please call to discuss availability / options
To ensure we can turn your bike around as quickly as possible we ask that your bike is brought to us in a reasonably clean condition, bikes that are overly dirty will need to be cleaned at an additional charge of £15.
Our workshop is incredibly busy and we need our storage space in order to continue to be able to offer great service. We ask that bikes are collected within a timely manner.
When new parts are needed to complete a job or service we’ll agree the cost with you before we carry out the work. Also please bear in mind that bikes are complex machines, some jobs may cost a little more depending on configuration and specification. We’ll let you know in advance if that’s the case.
True North Adventures & Cycle Hub
True North Adventures are based in the south west corner of the Peak District National Park within the Staffordshire Moorlands directly beneath the Roaches near the market town of Leek. Our Cycle Hub is an independent, bespoke service centre and retailer specialising in high quality products for those who are looking for the best.
This fantastic location in the Peak District has some of the best riding that the UK can offer, be it on the road, mountain or gravel bike.
True North Adventures & Cycle Hub
True North Adventures are based in the south west corner of the Peak District National Park within the Staffordshire Moorlands directly beneath the Roaches near the market town of Leek. Our Cycle Hub is an independent, bespoke service centre and retailer specialising in high quality products for those who are looking for the best.
This fantastic location in the Peak District has some of the best riding that the UK can offer, be it on the road, mountain or gravel bike.
Fill in your details and we’ll get back to you in no time.
